Artenius Aqua is a PET in pellets, suitable for stretch blow moulding in one and two stage processes. Especially conceived for still water packaging, it has the required mechanical strength, colour, transparency and excellent organoleptic properties that this kind of package demands. It can also be used for lightly carbonated water packaging.

Artenius Pura is a PET in pellets, suitable for stretch blow moulding in one and two stage processes. Especially conceived for still water packaging, it has good mechanical strength, colour and transparency and after conversion will produce performs and bottles with an extremely low level of Acetaldehyde, ensuring that water purity is not compromised. It can be used as well for lightly carbonated water packaging.

Artenius Global is a PET in pellets, suitable for stretch blow moulding in one and two stage processes. Especially recommended for general applications , the main requirement of which is the balance of optical and mechanical properties. It is particularly suitable for food packaging, carbonated soft drinks and spirit drinks packaging and for film applications.

Artenius Global Plus is a PET in pellets, suitable for stretch blow moulding in one and two stage processes. The main market applications are for food packaging, carbonated soft drinks, waters and general purpose packages

Artenius Hot is a PET in pellets, recommended for the packaging of products that require a high temperature during cooking, for instance dual oven able trays for ready meals. It has a fast crystallization speed and high mechanical strength.

Artenius Care is a PET in pellets,a resin with high viscosity adequate for technical extrusion and for blow moulding of containers for cosmetics and pharmaceutical applications. It is also suitable for extrusion of monofilaments with an excellent melt strength.

Artenius Tech is a polyester homopolymer in pellets, especially conceived for industrial yarns and filaments. This grade has outstanding mechanical properties and high viscosity.

Especially designed for injection processes, is suitable for applications where mechanical properties, gloss and transparency are an advantage. Displays profiles, point of purchase and pharmaceutical test tubes are the main market applications.

Artenius Bright is a PET in pellets, suitable for injection moulding. Especially adequate for a large and general applications scope, which main requirement is the even balance of optical and mechanicals properties. Tooth brushes and displays are typical applications of Artenius Bright.

Artenius Design is a PET in pellets especially designed for thick wall applications. This grade presents a higher IV and outstanding mechanical properties. Suitable for thick sheet extrusion up to approximately 5mm thickness. It is particularly suitable for use in thick wall preforms, which require slow crystallization to achieve high light transmission and a neutral colour tone.

Artenius Design Plus is a PET in pellets especially designed for complex thermoforming with the tailored characteristics of high IV/high melt strength and a very slow crystallization rate/high clarity and light transmission in very thick wall sections. Suitable for thick sheet extrusion up to approximately 9mm thickness with high light transmission and a neutral colour tone. Films produced with Artenius Design Plus have enhanced sealing capabilities.

Artenius Flow is a PET in pellets, suitable for stretch blow moulding in one and two stage processes. It is especially conceived for applications where high toughness and transparency are a requirement. Carbonated soft drinks, cosmetics and household cleaning products are the most suitable applications. It can also be used for film packaging and sheeting applications via extrusion.

Artenius FastFlow is a PET in pellets, suitable for stretch blow moulding in one and particularly two stage processes. Especially conceived for the packaging of highly carbonated soft drinks, it has excellent mechanical properties, and will give good performance in blow moulding processing speed, balanced with energy savings.

Artenius FastFlow Plus is a PET in pellets, particularly suitable for two-stage stretch blow moulding processes. Especially conceived for the packaging of highly carbonated soft drinks, it has excellent mechanical properties and will give outstanding performance in blow moulding processing speed, with class-leading energy savings. In addition, it has been formulated to give a step-change enhancement in bottle aesthetics with a clearly improved clarity compared to all other competitive CSD reheat resins.

Artenius Fashion is a polyester in pellets especially conceived for textile applications. With good mechanical properties and low viscosity is the best choice for low pilling applications.

Artenius Xcel L is a polyester in pellets especially conceived for textile applications. With good mechanical properties and low viscosity is the best choice for low pilling applications.

Artenius Xcel M is a highly modified PET copolymer in pellets especially designed for the use in the manufacture of profiles and thermo shrinkable films by extrusion process. The material is easy to process and offers excellent gloss, clarity and high melt strength.

Artenius Xcel M is a highly modified PET copolymer in pellets. It has been designed for the use in the manufacture of films, rigid containers and heavy gauge sheets. It has excellent melt strength which makes it suitable for extrusion and thermoforming processes.

Artenius Xcel Plus is a highly modified PET copolymer in pellets. With outstanding melt strength and excellent mechanical properties makes it suitable for extrusion and thermoforming applications with a very wide processing window. It has been especially designed for the use in the manufacture of films, rigid packaging, heavy gauge sheets, displays, blisters, pharmaceutical packaging, medical devices and different kinds of tailored objects which can be obtained through several shaping and fabrication techniques.